|
 |
TOSHIBA
41-inch CRT projection unit |
|
 |
41" CRT CUBE----P4130/P4135, P4140/P4145---- Choosing
flexibility The P4130/P4135 series cubes accept both NTSC, PAL & VGA
input signals. The P4140/45 series cubes also accept a SVGA signal inputs.
| |
Digital control All
controls, including picture size, position, white balance, convergence and linearity
can be digitally adjusted with a remote control unit or by a personal computer
with a RS-232C interface. Convergence, the most complicated and time consuming
of adjustment is tamed by using digital technology and is easier than purely analogue
control or techniques. Adjustment is done with eight horizontal and seven
vertical points (NTSC, VGA and SVGA ; eight by eight points in PAL) that can be
selected individually or in groups to achieve the best convenience. The result
is a precise set-up in minimal time. High quality
images free from flicker Contour correction of
the luminance and chrominance circuits regenerates vivid pictures, while RGB contributes
to high picture quality. When the cubes are used with TOSHIBA's TMP100 Video
Wall processor, a double scanning system serves up flicker-free pictures in both
NTSC and PAL modes on the P4130V. It also improves the quality of magnified
images. An optional seamless screen that further enhances image quality is
also available. Easily reset control data
All user adjustments to the digital data controls can be effortlessly reset to
the factory presets with a computer, bringing extra flexibility and convenience
to frequent use. Quick replacement of engine
Any problem requiring a change of engine is quickly and easily dealt with.
Release the quarter turn screws on the back of the cube and slide the engine out.
Three color temperature positions A choice of three color temperature
positions greatly add to user convenience: 6500K is the standard white color
temperature; 3200K is ideal for use in TV studios; the third position
can be set to the user's preference. Adaptable ABL All cubes in a system
can be linked by a system bus that offers unitary brightness control and a completely
natural brightness balance. | |
 |
Specifications are : | |  |
Model name | P4130UW,P4130E,P4135E | P4130VU/P4130VE,P4135VE |
Type | 41-inch
rear-projection (Mono Body-RENTAL), P4135 series (retractable) |
TVsystem ............Input ............Frequency | NTSC/PAL
NTSC:fh=15.73kHz; fv=60Hz PAL: fh=15.63kHz; fv=50Hz | NTSC/PAL/VGA
NTSC:fh=15.73kHz; fv=60Hz PAL: fh=15.63kHz; fv=50Hz VGA: fh=15-35kHz;
fv=40-120Hz | Projection tube | 7-inch
Toshiba CRT x 3 | Screen frame | 2.5mm
(option seamless) | 1.75mm(option seamless) |
Brightness | 2055cd/m
(600ft-L) (white peak) | Resolution | NTSC/PAL
H: 800 lines or more V :350 lines or more | NTSC/PAL
H: 800 lines or more V :350 lines or more VGA: 640 ?480 pixels |
Viewing angle | Horizontal:
Min.150 degrees, Vertical: Min 60 degrees | Color
temperature | Selection of 6500K, 3200K
and USER Position | Operating
temperature | 5 - 35°C/
41-95°C | Operating humidity | 30-70% |
Power | AC100-240V
50/60Hz, 260W | AC120, AC220-240V 50/60Hz, 300W |
Dimensions (H x W x D) | 846
x 631 x 1110 mm; 33.3 x 24.8 x 43.7 inches | Weight | 90kg
(198lbs) for P4130 series, 83kg (183lbs) for P4135 series |
Video input | BNC x
1 | Video output | BNC
x 1 | RGB input Connector | D-sub
15 pin (female) x 1 | Signal level | Analog
RGB signal...0.7Vp-p (75-ohm termination) | Remote
control (option) | CT-9802 |
Communication interface | RS-232C:
D-sub 25-pin (female) x1; Band rate: 1.2k, 2.4k, 4.8k, 9.6k baud |
Model name | P4140SE, P4140SU,P4145SE |
Type | 41-inti
rear projection (Mono Body P4140S; retractable P4145S) |
TVsystem ............Input ............Frequency | NTSC/PAL/VGA/SVGA NTSC:fh=15.73kHz;
fv=60Hz PAL: fh=15.63kHz; fv=50Hz VGA/SVGA: fh=15-50kHz; fv=40-150Hz |
Projection tube | 7-inch
Toshiba CRT x 3 | Screen
frame | 1.75mm slide type
(seamless option available) | Brightness | 2055
cd/m (600ft-L) (white peak) | Resolution | NTSC/PAL
H: 800 lines or more, V: 350 lines or more SVGA: 800 x 600 pixels |
Viewing angle | Horizontal:
Min.150 degrees; Vertical: Min.60 degrees | Color
temperature | Selection
of 6500K, 3200K and USER position | Operating
temperature | 5-35°C / 41-95°C |
Operating humidity | 30-70% |
Power | AC100-120V
50/60Hz, 300W (P4140SU) AC200-240V 50/60Hz, 300W (P4140SE, P4145SE) |
Dimensions (H x
W x D) | 846 x 631 x 1110mm;
33.3x 24.8 x 43.7 inches | Weight | 90kg
(198lbs) for P4140 series; 83kg (183lbs) for P4145 series |
Video input | BNC
x 1 | Video
output | BNC x 1 |
RGB input Connector | D-sub
15 pin (female) x 1 | Signal
level | Analog RGB signal...0.7Vp-p
(75-ohm termination) | Remote
control (option) | CT-9956
(Basklit) | Communication
interface | RS-232C: D-sub
25-pin (female) x 1, Baud rate: 1.2k, 2.4k, 4.8k, 9.6k baud |
DIMENSION |
|

|
|
| | |