|
|
 |
GraphXMASTER CS70-500Xe |
|
 |
|
Be in control 24/7
Innovation leading person as high performance , highly reliable scheme proceeding from goal of Christie, offer the most high-quality performance and extremely good products solution for rear-projection screen and control room equipment, namely CS70-500Xe. This product utilizes the department to look at technology and innovation for many years to develop, offer the best solution of one grade of products of industry especially designed for the fact that tile display walls shows the wall and control room equipment。
Christie understand that paves your requirements for equipment with high dependability , with secure quality and demand under the environment in your rear-projection and porcelain . Can offer characteristic and flexibility of all the above good quality to you to this CS70-500Xe. The products are longe-lived, the wearing and tearing rate is low. Its strong characteristic including ：
SXGA resolution ratio
Single chip DLP &-#8482; technology is fine, guarantee performance quality
24/7 Is it make you to be carefree to design
Dependability is high, there is not the time interval of a trouble equally
Unique 700 cd/m2 is higher in luminance
The equipment is longer with the life-span that the advanced xenon lamp gives out light
Electronic structure of CoRE module already proved by Christie
Exceed high performance, the low distorted device
The low and deep design of platform adapts to the narrow and small space
The module is more durable in design
Installation is simple and convenient and easy to make up
Can pile up the limitless height to the fourth Floor
Alternate 1mm among the screens, is bordering on not sewing
Utilizing technological experience of projection over the past 20 years, Christie world-class operation group has designed and developed RPMS-500Xe, pay attention to the detail innovation and technical application 。
GraphXMASTER CS70-500Xe, to having as suitable as projection cube of many frequency fixed frequency
GraphXMASTER CS70-500XeF (fixed frequency, has not rejected the wall): The fixed frequency (VESA , SXGA ), with showing it is the best that the wall controller shares the result 。
GraphXMASTER CS70-500Xe (much frequency, has not rejected the wall): Performance is overall. Can be suitable with such optional module as the picture decoder ,etc。
Reliable design
Dependability is the most important in tiled wall is installed, especially for requiring 24/7 of the harsh control rooms and data control centerses. Since under this kind of environment, the projection cube shows that should not merely permit the deviation trouble in the design, have guaranteed to use the high performance after coming down for many years. CS70-500Xe can offer such dependability and life-span , so that you can reduce the risk in installation. CS70-500Xe has extremely high attention to their dependability on all respects that are designed 。
Have no time interval of a trouble equally high
A lot of factors, to guaranteeing high performance work in the projection cube system of quality, such as electronic dependability and in order to the performance that is verified , dispel the heat and control with the environment, the layout and making up , and countless design yardstick and precautions,etc.. These are considered to some extent in CS70-500Xe, by guaranteeing the most reliable performance. The design of Christie is analysed that guarantees the products can accord with the performance demand by the industry expert, can offer to our customer for the main system module to use the most reliable products of performance equally without time interval of a trouble of more than 30,000 hours。
The ones that have already been proved have looked like technology apparently
CS70-500Xe has adopted the single chip DLP technology of the equipment Company of Texas (Texas Instrument ) to guarantee the good performance and dependability in long time. A lot of years ago, Christie is the development partner of the equipment Company of Texas, cooperated with it intimately, utilize DLP technology to seek the high-performance projection cube product design together. Besides reseach, technology this prove research , analysis in time for one year also, so as to ensure its dependability and stability of the life-span。According to study, board but service life in the above-mentioned 100000 hours. In addition, the single chip of Christie has used and adopted the unique color runner of 6 Sigma with the double speed that is proved already on automobile technology to be designed, can possess high performance . Want to know DLP technological details, please visit http://www. dlp. com/dlp/search. Asp or having a look around the reliable performance article of white paper and relevant DLP knowledge
Improving and reducing the warm design adds dependability even more
Design complexity their include optics device , optics , mechanics and highly unanimous electronics principle with many kinds of projection cube that technology combine, all these need high-level reducing the warm dependability of designing the security system of ability . The planning group of Christie has carried on careful research to CS70-500Xe, has adopted the design of the information of five unique fans. Under this system , it is so warm as to receive the balance in the course of throwing and gaining entirely to make a reduction of: Two fans are in the optics module , the air current that makes in optical instrument and light is in above 35CFM; There are two fans besides in the ballast, one is used for reducing for the centre electron tube instrument warmly 。
In the area of optics and lighting, reduce and expect extremely much warmly, here is designed and utilized the latest computer liquid power software, guarantee the control of correct imitation and best temperature of the optics module . At the same time in the optics module, a difficult a ring of controlling temperature offer outstanding temperature control after utilizing the theory of the fin to regard this as this all the time in the main fluorescent lamp。
The electron of the module is designed
CS70-500Xe
CS70-500Xe utilizes the core electronic device that Christie oneself designed. This two of one designs that have already been proved are on the exploration for many years of Christie and foundation of studying, can offer general comprehensive structure and stability , can upgrade and expand even many years later. This design can also offer the security on designing quality , dependability of the products and back-end technical support of products。
Rear-projection performance and picture quality
Seldom begin to extremely carries on the consideration conscientiously to the cube system of the projection on rear-projection performance in the product design. CS70-500Xe, in order to guarantee a lot of characteristics that ultra and first-class rear-projection performance offers the products and consider：
Distorted rate of low geometry
Lead the high projection equipment result to cause picture element to lose distortedly or information is lost. It is at the same time small a little and distorted and very showy in the rear-projection environment. CS70-500Xe projector includes the high performance that is especially developed. There will be error-correcting function of on-the-spot camber together with rear-projection lens in ultra and short SXGA, this function uses designing for rear-projection specially. The distorted rate of geometry of the lens was in 0 unexpectedly. Under 05%, and does not influence the range of the whole environment temperature 。
High-quality color consistency
Among rear-projection environment, each time with get formation of image course consistency of color very important many times. If show color in course is inconsistent , then when one dose of forms of rear-projection bar once, it is most obvious to behave . Color quality is no longer attractive. While choosing the projection system that rear-projection use, had better test with more than one projection cubes at first , observe the consistency attribute of the color and size of function of the system carefully. Successful test, we propose watching intactly like 5% , 10%, 15%, the demonstration on 20% of the grade different levels. Because of target demonstrating it being different, some questions difficult to perceive may appear too. Should demonstrate the intact rear-projection of three primary colors too 。
CS70-500Xe has a lot of to guarantee first-class color consistency and ability and characteristic of suitability. In the dull and stereotyped technology such as LCD, we have selected DLP technology for use. LCD technology has utilized the liquid crystal to regulate and move while forming images, the color quality and density should be influenced by firm degree of layer of crystal between every board produced. Unanimous attribute of influence color that extremely small difference will be great too. In order to solve this problem, a lot of projection equipment has already used the color of one dose of types of the bar to control the method recently, remedy to this consequence in the bar dose. Though such a measure progresses to some extent, this kind of solution is extremely limited, and very difficult while changing and controlling 。
To include being complicated in the ones that use are apparent as simple like DLP technology. It not including the crystal or the crystal layer adjusts well. As a little mirror of device technologies, DLP board is it can make all to include through flash the little mirror of the lens. This has offered high-quality mere reflection consistency. In the single-board design in CS70-500Xe, there is color wheel that can offer 16 million kinds of colors . Design this another great advantage is it can store charging the smooth question of 3 primary colors in to look at。
Besides inside color consistency, the consistency on the rear-projection wall is one of the questions that should be considered too in the design. It can make you adjust the color of matching on the wall that CS70-500Xe includes the original tone section. This is not that simple drive or garmma are regulated , but to the primary color own regulation, this carries the key characteristic of making a basket 。
Finally, another color homogeneity advantage of CS70-500Xe is its xenon bulb. Other metal bulbs are as the color change will take place in the passage of time, but the xenon can keep the stability of color temperature in the course of having 。
Fine luminance
The system of the luminance with bad characteristic will form images unevenly while showing each time. This is very unfavorable to result showing each time, especially like this to rear-projection. Generally speaking, the luminance inequality has two kinds of different results: Or luminance that form at will too change for put not smooth, higher than corner and luminance of edge for luminance of centre. To projection system , is it show technology , concern light and design of optical system can reduce two luminance uneven phenomenon these to choose conscientiously 。
DLP has offered the consistency that is only reflected by itself technologically in CS70-500Xe. System adopt good lens range pole system of performance manage and control the light before the light reaches the display board at the same time. The optics characteristic of the lens has guaranteed all homogeneity distributed on the screen。
Though general projection performance should be used for saying to rear-projection that can accept, but Christie controls the characteristic of the luminance homogeneity to bring up to the new height. The characteristic utilize Christie core electron and advantage of software design, offer to user from centre to edge but regulation and control means. Can realize nearly 100% of the luminance homogeneities。
The luminance keeps unanimous and essential while the whole system uses. CS70-500Xe has automatic luminance to follow the characteristic (LiteLOC ). LiteLOC can automatic to control projection luminance while using independence have. This technology was born in 1997, it utilized 500 watts of unique xenon lights and towns to flow and design, prove it is a kind of rare rear-projection characteristic. The xenon bulb uses ability between 350 watts and 500 watts。The illumination feedbacks the luminance of control bulb with constant control system, so, once the luminance of the bulb is weakened, the electric consumption of the bulb increases to keep the luminance unanimous automatically. This is a simple but fruitful innovation that Christie carries on. It is easier for this characteristic to make the bulb change too, an adjustable watt level has guaranteed to show the luminance consistency in the whole course。
Low deviation system
All projection equipment is it can appear a certain deviation of degree to use for a long time, especially after the projector is used for many years in succession . CS70-500Xe adopts the design that controlled and made the deviation minimize, reduces the maintenance and resetting after using for a long time。
Have strengthened three and designed and guaranteed the low deviation : Show technology , the stability of the optical system and lighting technology. We have chosen DLP technology in order to guarantee the dependability , macrobiotic life and characteristic of the low deviation . Have designed and utilized advanced glass composition to also pay special attention to the optics coat technology best in quality in illumination , it and can be for a long time all the time to so as to ensure optics performance low and loss. Lighting technical application xenon. The xenon lamp illumination regards proving as performance better and the colour temperature deviation is little, far exceeds other technology such as MH and UHP. The deviation in rear-projection is used, the deviation is extremely apt to find and troubling, and the xenon lamp is the last choice。
Use and more material benefit in the characteristic
It is with low costs to use
The use cost is an important standard while determining to choose the projection solution for the rear-projection wall and control room environment. The factor influencing use cost is as follows, the life-span of the bulb, consuming and maintenance service expenses of electric consumption,etc.. Christie all consider these factors to some extent, offer the best solution to you: Low use cost, high performance 。
CS70-500Xe is in the third platform of products of Christie, use 500W xenon lamp technology and Christie unique bulb to control and design, longe-lived, easy to use. The customer of Christie uses replacing the interval in 3000 to 4000 hours equally under 24/7 of the environments, some bulbs can also exceed 10000 hours ！
All power consumption cost is it watch person who install local electric rate to want. CS70-500Xe makes the power consumption keep in 750 watts of the following. Storing the mode through using the bulb, all power consumption can be reduced greatly。
The products of control room of Christie are longe-lived, the single time limit that go beyond and guarantee at first, so it is cheap to safeguard the expenses, show the performance of the wall is reliable . Christie to buy department look at product very much satisfied with user。
The display controls the characteristic
Can use for a long time for high frequency keyboard that CS70-500Xe design , control the influence of the equipment other instrument. It is very essential for the projection cube to free of other types keyboard one。
As a kind of miniature portable keyboard, whole projection wall can is it control through outside if equipment touch board controller , computer or Christie that network show wall controller control to put. In order to enable using and control more simple and more convenient , have also joined the frame of the standard agreement in the design。
The system and control of judging
CS70-500Xe
Including judge in succession that transmits and transmits the characteristic with the state in controlling , mistake. LED that the mistake is transmitted is offered on the projection cube hardware, is used in ill-judged affirmation . Monitoring and the detailed mistake, the mistake can be controlled through contacting the network and the outside computer / the network / the controller system,etc., come to the position on the demonstration wall of the distant place or website outside to report and management 。
Advanced production technical support
Christie realize that demonstrates technology has great meanings for our customer in the control room and rear-projection. As famous technical support, with serving the leading producer in the world, Christie guarantees the customer can get high-quality training , service and technical support in our wide sale and technical support network 。
Technological experience that Christie has more than 20 years in projection solution. Christie, to and need to offer service of collecting now for the customer constantlying, technical support is very proud of the solution of the best performance all over 。
Characteristic
- Simple depth (34")
- Single chip, 1280 x 1024 picture element DLP™
技术
- The opposite angle of back plate looks like apparently
- Brighter than general 700 cd/m2
- High contrast ratio has not sewn the screen (divide and sell)
- Users can change 500W Cermax xenon lamp (in 350W , use for average 5000-6000 hours under 24/7 of the states)
- 70" Picture measurement of opposite angle
- Simple menu on the article of setting-up via the wired keyboard
- Built-in RS232 Control the interface with many projectors network
- Wanton decoder / scaler
|
|
|
|
